How do I build a PrivacyPod?

Every PrivacyPod ships flat‑packed with a step‑by‑step assembly manual and all required hardware—no special trades or power tools needed.

1. Prep the space
Clear a footprint a few feet larger than the pod and ensure a standard 120 V outlet is nearby.

2. Uncrate & sort
Panels arrive numbered; lay them out in order and double‑check the parts list (screws, gaskets, Allen keys, driver bits).

3. Frame first
Connect the aluminum base rails, then bolt the corner posts. Integrated levelers let you fine‑tune on uneven floors.

4. Walls & glass
Slide each acoustic panel into the pre‑machined channels, then secure the 5+5 mm laminated glass with the supplied clamps.

5. Roof & wiring
The roof drops in as a single piece—plug the quick‑connect harness into the ceiling fan/light module and route the 8 ft power cord out the floor grommet.

6. Final touches
Hang the door, snap in the magnetic seals, and test lights, fans, and outlets.

Timeline & manpower
Two people, one cordless drill, and about 4 hours for an S or M Pod (add 1–2 hours for XL). Our video guide and PDF manual make each step clear.

Prefer white‑glove installation?
Our nationwide tech teams can deliver, assemble, and remove all packaging debris so you’re ready to work the same day.